Mumbling about computers

Network update part 3: Network segregation

Posted on under [ ]

After adding a fancy router to my setup and adding some monitoring I decided I could segregate my network, as the current state was just bunching everything on the common VLAN.

New setup:

You can find the fancy DOT file here.

The main idea was to segregate devices that do not need to talk to each other to avoid potential security risks. Most stuff is in the 'server' VLAN now, and it doesn't really make sense to access it directly, as we have access via an nginx reverse proxy that does SSL termination.

My first step was to first move everything into their respective VLANs:

Creating interfaces

On the router I simply added these lines to my /etc/network/interfaces file

iface lan0.10 inet static
        address    192.168.10.1
        netmask    255.255.255.0

iface lan0.20 inet static
        address    192.168.20.1
        netmask    255.255.255.0

iface lan0.30 inet static
        address    192.168.30.1
        netmask    255.255.255.0

iface lan0.40 inet static
        address    192.168.40.1
        netmask    255.255.255.0

iface lan0.50 inet static
        address    192.168.50.1
        netmask    255.255.255.0

and ran ifup for every interface.

On the server I added something similar (but with bridges):


# wifi
iface enp8s0.10 inet manual

auto vmbr10
iface vmbr10 inet static
        address  192.168.10.10
        netmask  255.255.255.0
        gateway  192.168.10.1
        bridge_ports enp8s0.10
        bridge_stp off
        bridge_fd 0
        bridge_vlan_aware yes
        nameserver      192.168.10.1

(repeated 5 times with matchin VLANs)

Router configuration

In the shorewall interfaces file I added:

wifi    lan0.10         dhcp,tcpflags=0,nosmurfs
srv     lan0.20         dhcp,tcpflags=0,nosmurfs
guest   lan0.30         dhcp,tcpflags=0,nosmurfs
bnet    lan0.40         dhcp,tcpflags=0,nosmurfs
dmz     lan0.50         dhcp,tcpflags=0,nosmurfs

In the snat file I also added my networks.

MASQUERADE      169.254.0.0/16,\
                192.168.2.0/24,\
                192.168.10.0/24,\
                192.168.20.0/24,\
                192.168.30.0/24,\
                192.168.40.0/24,\
                192.168.50.0/24     wan

In the zones file I added:

wifi    ipv4
srv     ipv4
bnet    ipv4
guest   ipv4
dmz     ipv4

Blocking everything

The idea of this setup was to remove un-needed access to everything, so I started by removing external access to everything I could think of:

## Deny NTP and DNS to the internet, we serve our own and advertise it via DHCP
NTP(REJECT)    loc        net
DNS(REJECT)    loc        net

This implicitly left:

  • srv, bnet and dmz without any connectivity at all

Allowing what's needed

As stated in the image, I needed some connection between the VLANs:

  • lbalancer -> rproxy tcp on port 80
  • sonarr, twitch -> Internet(http, 80 and 443)
  • rproxy -> sonarr (as we access sonarr via the lbalancer even internally)

Issues

I (unsuprisingly!) ran into some issues, even though in theory everything should be OK:

  • Certain devices don't give a shit. Chromecast ignores the NTP server assigned by the DHCP server.
  • Madsonic (service I use to self host music) requires internet access to start (!!). They are downloading xsd files from both springframework.org, maven.apache.org and java.sun.com. Without these files, Madsonic refuses to start. After this issue I'll look for another music player.
  • I am currently having an issue routing from rproxy (VLAN 20) to the physical server on it's untagged interface.
    • If I connect from rproxy(20) to server(20) then it works fine (via the linux virtual bridge, never reaches the router)
    • Otherwise packets are being dropped, even though the router sees them.

"Fixes"

NTP for chromecast:

DNAT        wifi    loc:192.168.2.1             udp    123

I just map any NTP request coming from wifi to my NTP server

Unable to route

I added IP for the physical server (VLAN 20) in /etc/hosts for the rproxy container, which makes it "work".

Pending issues

I left quite a lot of things with access to the internet, I'll write a follow up post detailing how I closed each one of them. For now the list is:

  • Jenkins: ssh out, used to update git repos. http out: used by a Docker image to put images in S3.
  • Madsonic (detailed above)
  • Sonarr http out
  • Twitch http out (this is a custom twitch broadcaster I wrote so I can watch the same stream all over the house)
  • Router has full internet access (testing + repositories)
  • Grafana is trying to reach grafana.com (http) looking for updates for plugins or somesuch.
  • Pip is broken on all hosts!
  • Books cannot connect to IRC anymore.

Possible solutions

  • For HTTP I'll use a simple proxy which will be in the DMZ (Also useful for pip).
  • For SSH I'll simply add a tcpproxy instance which will map 1:1.
  • I'll have to investigate the IRC protocol to proxy it (and DCC) which is core for my books setup.